Sumer Metal Industries can fulfill your requirements at the shortest time. We supply most of the grades and quality which are available in the market. Given below are the quality/grades we supply along with the other useful information regarding Stainless Steel Sheets, Plates and Coils.

Stainless Steel Coils Supplier,
ASTM A182 Stainless Steel Sheet and Coils Stockiest,
SS Sheet, Plate and Coils Stockholder,
ASTM/ASME Steel Plates and Sheets Stocks,
ASTM Stainless Steel Sheets and Coils Supplier In India,
SS Plates,
Stainless Steel 304 Sheets Exporter,
Sheets and Plates Manufacturer in Mumbai,
Stainless Steel Coils,
Stainless Steel 202 Sheets and Coils Dealer,
Steel Sheets, Plates and Coils Exporter,
Stainless Steel Plates,
SS 316L Sheets and Plates,
Top Quality Stainless Steel Sheets and Plates.




When aluminum is passed between rolls under pressure, it becomes thinner and longer in the direction in which it is moving. This simple process is the basis for producing aluminum plate, sheet and foil. Sheet, the most widely used form of industrial aluminum, is used in applications including aerospace (the skins of planes), transportation (auto body sheet), packaging (can bodies and ends) and construction (building facades).

Rolling begins with preheated sheet ingots that can weigh more than 20 tons. As the size of rolling mills has increased, so has the size of these ingots, but a typical ingot is approximately 6 feet wide, 20 feet long and more than 2 feet thick. The ingot is first heated to rolling temperature and fed into a breakdown mill, where it is rolled back and forth until the thickness has been reduced to just a few inches. The slab can be subsequently cold rolled or may be heat-treated to increase its strength. The highest strength alloys are heat treated and rapidly cooled to room temperature, after which they are stretched to straighten and relieve internal stress built up during rolling and heat-treating. They are aged naturally at room temperature or artificially aged in a furnace to develop the desired combination of strength and corrosion resistance. Finally, the plate is trimmed to final size. Plates produced in this manner may be used at full thickness, but are often machined into a variety of simple to complex shapes.The production of sheet or foil usually starts out the same way as plate but the slab is further rolled through a continuous mill to reduce thickness and wound into a coil at the end of the line. These coils are subsequently cold rolled, from one to several passes at cold rolling mills. Coils may be heated in a furnace to soften it for further cold rolling or produce the desired mechanical properties. Cold rolling is the last step for some sheet, but other types (referred to as heat-treatable) are subjected to further elevated-temperature processing to increase their strength.Some sheet and foil products may also be produced using the continuous casting process in which molten metal enters the caster, which produces a hot rolled coil, thus passing the ingot casting and hot rolling steps.


Plate is used in heavy-duty applications such as those found in the aerospace, military and transportation product manufacturing. Aluminum plate, machined to shape, forms the skins of jets and spacecraft fuel tanks. It is used for storage tanks in many industries, in part because some aluminum alloys become tougher at super cold temperatures. This property is especially useful in holding cryogenic (very-low-temperature) materials. Plate is also used to manufacture structural sections for rail, cars and ships, as well as armor for military vehicles.Sheet, the most widely used form of aluminum, is found in all of the aluminum industry’s major markets. In packaging, sheet is used to manufacture cans and packages. In transportation, aluminum sheet is used to manufacture panels for automobile bodies and tractor trailers. Sheet is used in home appliances and cookware. In building and construction, it is formed into products including siding, gutters, roofing, awnings and carports. Sheet aluminum can be color-anodized to black, gold, red, blue and hundreds of other colors. It can be etched to a matte finish, polished to a sparkling brightness or textured to resemble wood and painted.


The Sheets, Plates and Coils comes with grade of Stainless Steel (S.S), ASTM AND ASME.


1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.

Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.

Stainless Steel

ASTM / ASME SA 240 Sheets and Plates,
SS 304 Sheets and Plates,
S.S 304L Sheets and Plates,
S.S 304HSheets and Plates,
S.S 309S Sheets and Plates,
S.S 309H Sheets and Plates,
S.S. 310S Sheets and Plates,
S.S 310H Sheets and Plates,
S.S 316 Sheets and Plates,
S.S 316H Sheets and Plates,
S.S 316L Sheets and Plates,
S.S 316 TI Sheets and Plates,
S.S 317 Sheets and Plates,
S.S 317L Sheets and Plates,
S.S 321 Sheets and Plates,
S.S 321H Sheets and Plates,
S.S. 347 Sheets and Plates,
S.S 347 H Sheets and Plates,
S.S 409 Sheets and Plates,
S.S 410 Sheets and Plates,
S.S 410S Sheets and Plates,
S.S 430 Sheets and Plates.

Duplex Steel

ASTM / ASME SA 240 Sheets and Plates
S 31803 Sheets and Plates,
S 32205 Sheets and Plates,
S 32550 Sheets and Plates,
S 32750 Sheets and Plates,
S 32760 Sheets and Plates.


1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.

Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.

Carbon Steel:

ASTM / ASME A 516 Sheets and Plates,
517 GR. 60 / 70 Sheets and Plates,
IS 2062 Sheets and Plates,
IS 2002 Sheets and Plates.

Alloy Steel:

ASTM / ASME A 387 Sheets and Plates,
In Grade:
F 5 Sheets and Plates,
F 9 Sheets and Plates,
F 11 Sheets and Plates,
F 12 Sheets and Plates,
F 22 Sheets and Plates,
F 91 Sheets and Plates.


1 MM TO 200 MM THK IN 1000 MM TO 3000 MM WIDTH x 2500 MM / 5000 MM / 10000 MM / COIL.

Foils, Shim Sheet, Rolls, Perforated Sheet, Chequered Plate.

Nickel Alloy:

ASTM / ASME SB 162 UNS 2200 ( NICKEL 200 ) Sheets and Plates,
UNS 2201 (NICKEL 201 ) Sheets and Plates,
ASTM / ASME SB 127UNS 4400 (MONEL 400 ) Sheets and Plates,
ASTM / ASME SB 424 UNS 8825 (INCONEL 825) Sheets and Plates,
ASTM / ASME SB 168UNS 6600 (INCONEL 600 ) Sheets and Plates,
UNS 6601 ( INCONEL 601 ) Sheets and Plates,
ASTM / ASME SB 443 UNS 6625 (INCONEL 625) Sheets and Plates,
ASTM / ASME SB 574 UNS 10276 ( HASTELLOY C 276 ) Sheets and Plates,
ASTM / ASME SB 462 UNS 8020 ( ALLOY 20 / 20 CB 3 ) Sheets and Plates.